专注磨练经验，匠心铸就精品！来自远方的【Refining slag】客户，您好！巩义威达自建厂以来一直致力于炉外精炼,适用于普碳钢、高碳钢、高、低合金钢领域技术研发和产品打造，已经累计为众多的客户提供过好质量的【Refining slag】产品！

Introduction of refining slag:

Refining slag is a technology used to mix raw materials in a certain proportion and particle size, and then heat them under the condition of lower melting point, so as to make raw materials sinter together and then break into particle size. The main components are Cao CaF2, CaO-Al2O3 and CaO-Al2O3-SiO2. The main components of the slag are sintering, pre melting and mixing.

The composition of sintered refining slag is more uniform, stable, and the melting speed is faster, but the cost is relatively increased. Because of the small density of sintering slag and many pores, it is easy to cause the suction in the refining process.

The pre melting refining slag refers to the refining slag which is used for steelmaking after mixing the raw materials in a certain proportion, melting the raw materials into liquid state at high temperature and higher than the melting point temperature of slag system in special equipment. The pre melting refining slag has high purity, uniform chemical composition, stable phase, low melting point, fast slag forming speed, can greatly shorten refining time and can be directly used for slag washing during ladle tapping process of converter, and improve the cleanliness of steel. And no fluorine or a small amount of fluorine, reduce the lining erosion, effectively reduce the fluorine pollution to the environment. Because of its compact structure and non water absorption, the slag is easy to store, transport and store, not powdered and volatile, which can significantly reduce dust pollution in steel plants, but the production cost is high.

In order to meet the needs of high-grade steel development, the refining slag is an indispensable auxiliary material and compound refining slag ball. It is more suitable for the purification of high-grade steel through the formulation of high-tech technology.

Refining slag properties:

The main components of refining slag are calcium aluminate, aluminum oxide, silicon oxide, calcium fluoride, magnesium oxide, etc. these metal ions combine to form calcium oxide calcium fluoride matrix, calcium oxide alumina matrix, calcium oxide alumina silica matrix, thus forming a composite material called refining slag. Refining slag is a necessary additive for deoxidation and desulfurization in the refining process of iron and steel enterprises.

Characteristics of refining slag:

Refining slag has the advantages of uniform chemical composition, low melting point, fast melting speed, reducing refining power consumption and shortening refining time. It is more and more valued by iron and steel enterprises, and is one of the more important steel-making additives at present.

The refining slag produced by our factory does not contain fluorine, hydrogen, nitrogen, carbon and other impurities, which is conducive to improving the quality of steel products; No water absorption, no erosion to lining and ladle; Compact structure, easy to transport and store; The product has stable phase and fast slag formation, which can obviously reduce the dust pollution of steel plant. With the wide use of refining slag, the steel-making enterprises have changed the production process of refining relying on high alkali materials, slag steel mixing and desulfurization outside the furnace, greatly improving the efficiency of steel production and the quality and performance of steel products.

Application of refining slag:

Before tapping, the refining slag is put into the ladle, because the molten steel flows into the ladle from the high level, it is the violent stirring between the molten steel and the refining slag, and the refining slag melts rapidly in the molten steel, and then accumulates and floats. Because of the strong reducibility of refining slag, it has a strong ability of deoxidation and desulfurization, which can remove oxygen and sulfur impurities in molten steel during the mixing process.